FD-600-CO-LAND | Carbon Monoxide Analyzer | H2 Compensated | Landfill & Biogas | NIST Calibration

Brand: FORENSICS DETECTORS
Model: FD-600-CO-LAND
User Manual: Click Here
EPA Conformance: Click Here

Features:

• 🎆 DETECT: Carbon monoxide analyzer measuring 0 -1000 ppm with 1 ppm resolution. Built-in pump for super fast detection.
• 🔬 SPECIAL: Special electrochemical H2 compensated CO sensor. Sensor made in the UK. Specifically made for landfill and biogas applications and other applications where H2 cross interference may be problematic for a regular CO analyzer.
• 🌈 COLOR DISPLAY: Color screen and graph functions allow for easy and intuitive operation. USB computer data logging included.
• 📲 ALARMS: The detector records alarm events with date and time stamps.
• 💪 STRONG: Robust design constructed with high-strength ABS and anti-slip grip rubber. Water-resistant, dust-resistant, and explosion-proof.
• 🕵️ TRUSTWORTHY: 1-year limited warranty. Arrives with a signed and dated calibration certificate.

Details: This is a top-quality FORENSICS DETECTORS carbon monoxide analyzer made specifically for landfill gas applications. It has a built-in pump allowing for super-fast detection & response, a carbon filter, and a water trap. This carbon monoxide analyzer has a 32-bit microprocessor, color LCD, and graphing capability. The unit fulfills the requirements as set by “ALTERNATIVE METHOD FOR THE FIELD DETERMINATION OF CARBON MONOXIDE CONCENTRATION IN LANDFILL GAS WELLHEADS UNDER 40 CFR 63, SUBPART AAAA.” These requirements were approved on 09/14/2021. Some highlights of the CO Analyzer requirements include:

• CO analyzers must have an H2-compensated CO sensor.
• CO analyzers with electrochemical sensors must have a carbon filter to remove H2S.
• CO analyzer must not show interference to methane (CH4), carbon dioxide (CO2), oxygen (O2), and nitrogen (N2) that are commonly found in landfill gas.
• The liquid must be prevented from entering the analyzer by a water trap or similar filter.
• The gas sample hose from the wellhead to the gas analyzer must be made of silicone, PVC, or other similar material that does not absorb or otherwise alter the sample gas.
• CO analyzer should have a vacuum pump suitable to pull against the wellhead vacuum and to transport gas from the sample point to the analyzer.
• CO Analyzer must be tested to NIST Traceable Sources with +/- 2% accuracy (two-point calibration and verification, ZERO and SPAN). A certificate must be provided by the manufacturer with the product.
• CO Analyzer response with an R-squared greater than or equal to 0.975 to be considered linear.

Included: Carbon monoxide analyzer, user manual, USB charging cable, charger, analyzer case, water trap, carbon filter, stainless probe, tubing, and certified calibration certificate.

Calibration Options:  
Calibration Service by Forensics Detectors
Calibration Tutorial (DIY)

Calibration Kit (DIY sold separately):
Calibration Gas (CO)
Calibration Gas Regulator (C10)
Calibration T-piece & Tubing

Accessories (sold separately):
Bump Gas (CO)
Gas Detector Waterproof Case
Gas Detector Stand
Telescopic Probe
Tubing (3ft)
Gas Sensor Replacement (Email Us)

Specifications

Carbon Monoxide (CO) Detection: 0 – 1000 ppm with 1 ppm resolution
Error: ≤ ± 5% F.S.
Response Time: ≤ 20 sec
Store / Operating Temp: 0°F – 122°F
Store / Operating Humidity: <95%RH
Battery: DC 3.7V Li-on battery, 3200 mAh
Gas Sensor Type: Electrochemical Gas Sensor
Gas Sensor Life: 2 – 3 years
Recommended Calibration Period: 12 months
Explosion-Proof Grade: ATEX certified Ex ib IIC T4 Gb
Weight: 14 oz
Dimensions: 5.1 in × 2.6 in x 1.2 in
Charge Time: 4 hours
Operating Time: > 10 hours
Alarm: LED, Buzzer, and Vibration
Calibration Location (USA): Los Angeles, California, USA
Calibration Standard (USA): USA NIST Traceable Gas Source
Calibration Location (Europe): Athens, Greece
Calibration Standard (Europe): European NPL Traceable Gas Source