FD-600-O2-LEAK – Oxygen Analyzer | Leak Purge & Weld Monitor (100ppm)

Price:

Brand: FORENSICS DETECTORS
Model: FD-600-O2-LEAK
User Manual: Click Here

Features:

🎆 USES: Used for precise oxygen depletion analysis, welding purge analysis, and argon or nitrogen leak detection: High-quality electrochemical oxygen sensor. Comes FACTORY-CALIBRATED.
🌈 COLOR DISPLAY: Color screen and graph functions allow for easy and intuitive operation.
📲 DATA LOGGING: USB recharging and real-time data acquisition. Arrives with silicone tubing, a stainless probe, and a filter.
💪 STRONG: Robust design constructed with high-strength ABS and anti-slip grip rubber. Water, dust, and explosion resistance.
🕵️ TRUSTWORTHY: 1-year limited warranty. Arrives with a signed and dated calibration certificate.

Details: You don’t need to break the bank for a quality 0.01% (100 ppm) resolution oxygen detector for O2 depletion analysis for TIG or MIG welding. The FORENSICS oxygen analyzer is an excellent option for those that would like to confirm low oxygen content in inert environments. The device accurately monitors oxygen levels while using inert gas to purge stainless steel, titanium, and other reactive metals.

When welding, the objective is to remove as much oxygen as possible.
The best welding results occur when there is no oxidation, hence the need for minimal oxygen levels.
Weld oxidation degrades the mechanical properties of a pipe and reduces its resistance to corrosion.
To reduce this oxidation, the oxygen content must be dramatically lowered.

The oxygen gas analyzer measures the oxygen content in the weld chamber down to 0.01% (100 ppm). Based on our industrial analyzer platform, the built-in pump is easy to use, light, and very portable. Simply insert the probe into the tubing with the filter and onto the analyzer barb. The user has full pump control, withdrawing small or large quantities of air with the built-in pump. The analyzer has a color screen, large digits, and on-screen real-time graphing. The detector is built using an advanced electrochemical oxygen sensor. The internal 32-bit microprocessor allows for user calibration, ON/OFF flow, and test control.

Included: O2 analyzer and magnet back, user manual, certified calibration certificate, USB charging cable, charger, 1 x 3inch stainless needle probe, particle filter, and 3 ft silicone tubing.

Calibration Options:
Calibration Service by Forensics Detectors
Calibration Tutorial (DIY)

Calibration Kit Items (DIY sold separately):
Calibration T-piece & Tubing
Calibration Gas (N2)
Calibration Gas Regulator (C10)
Bump Gas (N2)

Other Accessories (sold separately):
Gas Sensor Replacement (O2)
Gas Detector Waterproof Case
Gas Detector Stand
Air Gas Sample Probe
Tubing

Specifications

Oxygen (O2) Detection: 0 – 30% with 0.01% resolution
Error: ≤ ± 1%
Response Time: < 30 seconds
Store / Operating Temp: 0°F – 122°F
Store / Operating Humidity: <95%RH
Battery: DC 3.7V Li-on battery, 3200 mAh
Gas Sensor Type: Electrochemical Gas Sensor
Gas Sensor Life: 2 – 3 years
Recommended Calibration Period: 12 months
Explosion-Proof Grade: ATEX certified Ex ib IIC T4 Gb
Weight: 14 oz
Dimensions: 5.1 in × 2.6 in x 1.2 in
Charge Time: 4 hours
Operating Time: > 10 hours
Pump Rate: 0.1 – 0.3 LPM (100 – 300 cc/min)
Alarm: LED
Calibration Location (USA): Los Angeles, California, USA
Calibration Standard (USA): USA NIST Traceable Gas Source
Calibration Location (Europe): Athens, Greece
Calibration Standard (Europe): European NPL Traceable Gas Source